Arduino Water Sprinkler controller
The Arduino Water Sprinkler Controller is a centralized controller for a three 9v water sprinklers (electrovalves)
A "furniture-compatible" DIY RGB lamp I made. it uses Arduino-based hardware. The whole project is DIY, both in the microcontroller part and in the lamp part.
An Arduino-based granular synthesizer, totally DIY, from the Arduino board to the controls and the encloure. It is inspired by the Auduino project.
GlovOSC is a glove-based hardware controller. It allows controlling software and hardware locally or remotely connected in a network using the standard OSC messaging protocol.
GloWatch is simply a clock. However it is a clock without any hands, but with many glowing lights instead. Its frame is entirely handcrafted from plywood. Numbers are engraved and the finished piece is finished with metallic paint dark gray and bronze to provide a warm wrought iron effect.